Advertisement
CONTROLS
1 Input Switch. If the name wasn't clue enough,
this selects the input. All the way up for the
internal card (DAC), middle for balanced input,
bottom for SE input. Hint: if you don't have a card
installed, you won't hear anything when the card
is selected.
2 Baffle Compensation Switch. Up is on, down
is off. Turn this on when using open-baffle
headphones like the SR1a. Turn it off if using
circumaural headphones.
1
2 3
3 Preamp Enable. Up turns on the passive preamp
outputs, off turns them off. Note: the preamp is
passive, it has no gain and doesn't convert bal-
anced to SE or vice-versa.
4 Volume Knob. Turn it to the right to make the
music louder. Stop before it hurts.
5 Balanced Male 4-Pin Jack. Plug your Raal/
Requisite headphones in here. It's designed only
for these headphones. Don't try it with other
headphones. Don't make adapters. Seriously, this
is just for Raals, and that is all.
5
4
012345678
115VAC 30W
Advertisement
