Polygroup AR-P16007 Assembly Instructions

NEED HELP?
DO NOT RETURN TO STORE. PLEASE VISIT US AT:
www.polygroupstore.com
TREE ASSEMBLY INSTRUCTIONS
Congratulations on purchasing your new tree from
and easily set up your new tree.
1. Before you start to assemble your tree, choose an appropriate location near a wall outlet.
2.Assemble the tree stand and place on a level surface. (See Fig. A)
Fig. A - Tree Stand Assembly
Fig. B - Tree and Light Assembly
3. Please identify all sections before assembling.
4. Assemble the tree from the bottom to the top. Start with the bottom section and insert it into the assembled stand.Make sure the pole is
firmly inserted and secured into the stand.
5. Continue by inserting the upper tree section(s) to the lower section(s) until inserting the tree top.
6. Allow branches to fall into place or gently pull up and out. When adjusting branches, be sure that all wires are free of branch hinges.
7. Connect the light strings as per the color labels indicated in Fig. B and insert green label plug into the wall outlet. Your entire tree
should now be lit. If some bulbs do not light or flickers, search for any loose plugs and/or broken, loose or missing bulbs. Replace
bulbs promptly in order to maintain the performance and life expectancy of your pre-lit tree.
8. Begin to shape the branches and tips working from the bottom to the top. Start with tips farthest from the pole and fan out one to
the right, one to the left and one at the center of the main stem. (see Fig. C)
Fig. C
Top view
MODEL #: AR-P16007, AR-P16007A
1-888-919-0070
OR
Polygroup®!
Tree top
Section 1
Side view
Carefully follow the instructions below on how to quickly
Assemble
Red Labels
Together
Green Label
Plug Into Wall
1
Insert and slide the legs
upward into the slots of the
base until firmly secured.
*Electrical Rating For The Tree
(For Indoor Use Only)
0.34A 120V 60Hz
Insert
Outlet