Polygroup AR-P18006 Assembly Instructions

TREE ASSEMBLY INSTRUCTIONS

Congratulations on purchasing your new tree from
below on how to quickly and easily set up your new tree.
1. Before you start to assemble your tree, choose an appropriate location near a wall outlet.
2. Assemble the tree stand and place on a level surface. (See Fig. A)
Fig. A - Tree Stand Assembly
Fig. B - Tree and Light Assembly
Assemble
Purple Labels
Together
Section 1
Input: 120V, 60Hz,0.16A
Output: 29V 0.28A
Insert Green
Plug Adaptor
Into Wall Label Extension
Outlet
Cord into Adaptor
3. Each tree section is numbered with a sticker. Please identify all sections before assembling.
4. Assemble the tree from the bottom to the top. Start with the bottom section and remove protective cap
before inserting into the assembled stand. Make sure the pole is firmly inserted and secured into the stand.
5. Continue by inserting the upper tree section(s) to the lower section(s) until inserting the tree top.
6. Allow branches to fall into place or gently pull up and out. When adjusting branches, be sure that all
wires are free of branch hinges.
7. Connect light string and adaptor plugs as indicated in Fig. B, and plug it in to the wall outlet. Your tree
should now be lit. If not, please see TROUBLESHOOTING TIPS.
8. Begin to shape the branches and tips working from the bottom to the top. Start with tips farthest from
the pole and fan out one to the right, one to the left and one at the center of the main stem. (see Fig. C)
Fig. C
Top view
9. After shaping the entire tree following the previous step, slightly upsweep all branch tips for a uniform
look. Shift branches to fill any gaps. Your Christmas tree is now complete and ready to be decorated.
MODEL #: AR-P18006
Polygroup®!
Click
Tree top
Section 2
Side view
Carefully follow the instructions
Pull apart the legs of the stand so that they
are snapped into an x-shape, place the tree
stand on a level surface.
To close the stand, press the metal button
and fold the legs together.
*Electrical Rating For The Tree
(For Indoor/Outdoor Use)
Assemble
Blue Labels
Together
Assemble
Red Labels
Together
Assemble
Yellow Labels
Together
0.85A120V, 60Hz
Green Label
Plug Into Wall
1
Insert
Outlet