Polygroup TM30EH139C00 Assembly Instructions

TREE ASSEMBLY INSTRUCTIONS

Congratulations on purchasing your new tree from Polygroup®! Carefully follow the instructions below
on how to quickly and easily set up your new tree.
1. Before you start to assemble your tree, choose an appropriate location near a wall outlet.
2. Assemble the tree stand and place on a level surface. (See Fig. A)
Fig. A - Tree Stand Assembly
Fig. B - Tree and Light Assembly
3. Carefully insert the tree body into the assembled stand. Make sure the pole is firmly inserted into stand.
4. Shape the branches. Shift branches to fill any gaps, lightly upsweep all branch tips for a uniform
look.Your tree is now ready to decorate.
5. Plug the cord into wall outlet.

STORAGE INSTRUCTIONS

1. Unplug light string from the wall outlet and remove all ornaments and decorations.
2. Gently lift off the tree body from the tree stand.
3. Carefully place the tree into shipping box and tape it shut.
4. When not in use, please store your tree in a cool, dry place away from sunlight. Exposing your
tree to excessive heat or humidity may damage your tree.

TROUBLESHOOTING TIPS

For Pre-lit Trees, If The Tree Does Not Illuminate
1. Please check to make sure the power cord is plugged into the wall outlet. Refer to assembly guide for
instructions.
2. Please check for blown fuses at the light string plugs and power cord plug. Replace as needed.
Note: Please make sure to use appropriate replacement fuse as indicated on the light string plug.
3. Please check for loose, broken or missing light bulbs and replace as needed.
MODEL #: TM30EH139C00, TM30EH139M00
Insert and slide the legs
upward into the slots of the
base until firmly secured.
*Electrical Rating For The Tree
(For Indoor Use Only)
0.17A 120V 60Hz
Insert
Plug Into Wall
Outlet