Inserting The Batteries; Operation; Cleaning And Care - Clatronic MS 2860 Instruction Manual & Guarantee

Milk foamer

Hide thumbs

Table Of Contents

Table of Contents

Available languages

5....-05-MS 2860

•

Open the lid of the battery compartment on the back.

•

Insert 2 batteries of type UM3 "AA" 1.5 V. Ensure the correct polarity (see the

floor of the battery compartment or the imprint on the outside)! If the device is

not used for a prolonged period, please remove the batteries in order to prevent

battery acid from leaking.

•

Always replace the complete set of batteries; do not replace only one battery.

Note: Batteries should not be disposed of in normal domestic waste. Please return

used batteries to the appropriate collection points or to the dealer where you

bought them.

Never throw batteries into a fire.

Foaming Milk

Please use only fresh milk (preferably full-cream milk). The vessel should not to be

preheated. Please ensure that the vessel is only a quarter full as the volume of the

milk will increase greatly during foaming.

1. Pour a little milk into a suitable narrow vessel (e.g. a glass).

2. Immerse the foaming coil completely in the milk.

3. In order to start the milk foamer, press the on/off switch on the top of the devi-

ce.

4. Move the foamer smoothly up and down inside the vessel until the milk has

foamed sufficiently. Please ensure that the coil always remains immersed in the

milk.

5. Switch off the device with the on/off switch before removing it from the vessel.

6. Transfer the foam to the coffee using a spoon.

It is also possible to use your milk foamer for preparing salad dressing, mixed

drinks, shakes, cocktails, mayonnaise and egg white.

Accessories: Holder, chocolate sprinkler and sugar tongs

•

The foaming coil can also be removed for cleaning purposes. Place your finger-

nail between the housing and the marking. This will release the coil.

•

Please clean the device immediately after use under warm running water. It is

also possible to switch the machine on briefly. In order to avoid splashes, hold

the foamer in the sink or wash basin.

•

Please do not immerse the housing in water. If necessary, the housing should

only be wiped off with a moist cloth.

•

Please do not use any caustic detergents or abrasives.

02.04.2004

8:39 Uhr