Advertisement
IOT Gateway
Check by LEDs display
The normal working state of gateway should be No.1 LED is blinking
with other LEDs are off.
Check the display of No.1 LED
after power on for 15sec.
Blinking
Check the display of No.2
LED in one minute.
Always OFF
Check the display of No.3
LED in one minute.
Always OFF
Done
Manufacturer reserves the right to change at any time for specifications or designs without notice and incurring obligations.
Always ON
The gateway boots failed.
Use a new gateway instead.
Confirm the LTE signal around the outdoor unit. Use
Blinking
methods to enhance the signal if it does not work by
replacing a new gateway.
Blinking
Replace a new gateway
Yes
and the problem never
occurs.
Always OFF
The gateway is powered off.
Check the connection cable
between gateway and main
control board of outdoor unit.
No
Replace the main board of
outdoor unit.
4/5
02.2018
Advertisement
