Table of Contents
Advertisement
17. Spiked bumper
18. Bar tip sprocket
19. Saw chain
20. Guide bar
21. Chain catcher
22. Chain tensioning screw
23. Drive sprocket cover (535i XP)
24. Charging LED
25. Warning indicator
26. Power cord
27. Combination wrench
28. Battery charger
29. Button, battery status
30. Battery status
31. Warning indicator
32. Battery release button
33. Battery
34. Operator's manual
Symbols on the product
Risk of serious injury or death to the
operator or others. Be careful and use the
product correctly. Read the operator's
manual carefully and understand the
instructions before operation of the product.
Use approved protective helmet, hearing
protection and eye protection.
Do not operate the product with 1 hand only.
Do not let the guide bar tip touch an object.
Warning! Kickback can occur when the
guide bar tip touches an object. This causes
the guide bar to be thrown in the direction of
the operator. Risk of serious injury or death.
Chain brake, engaged (right). Chain brake,
disengaged (left).
Chain oil.
958 - 010 - 24.04.2020
Direct current.
Protected against splashing water.
Husqvarna HXX
Recommended cutting equipment in this
example: Bar length XX in (XX mm), max.
nose radius X Teeth, chain type Husqvarna
XX mm/XX
HXX.
Measured maximum kickback value without
XX
triggering the brake, for the bar and chain
combination on the label.
Measured maximum kickback value with
XX
brake for the bar and chain combination on
the label.
yyyywwxxxxx
Note: Other symbols/decals on the product refer to
certification requirements for some markets.
Symbols on the battery and/or on the
battery charger
Fail-safe transformer.
Use and keep the battery charger indoors
only.
Double insulation.
The rating plate shows se-
rial number. yyyy is the
production year, ww is the
production week.
Recycle this product at a recy-
cling station for electrical and
electronic equipment. (Applies
to Europe only)
3
Advertisement
Table of Contents
