Lenovo ThinkSystem SE350 Manual page 8

Removal steps
Removal of System from Rack (horizontal rack)
Note: Make sure you have enough help and use safe practices when performing Step 3.
Step 1. Disconnect all cables from the rear server. Open the rack release latch in the front of the server; then, slowly
slide the server out until it stops.
Step 2. Press the release latches.
Step 3. Carefully pull the server out of the rack.
Note: Use the same removal steps for the vertical rack.
First Edition (August 2019)
© Copyright Lenovo 2019.
LENOVO and THINKSYSTEM are trademarks of Lenovo. All other trademarks are the property of their respective
owners.
LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services
Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-
05925.
Printed in China
(1P) P/N: SP47A47247
*1PSP47A47247*
8 8