Sony SRF-18 Service Manual page 6

SRF-18
1-5. KNOB (TUNE)
1 washer
chassis block
1-6. GEAR (VC)
3 MAIN board
1 screw (M1.7)
Note: Tightening torque (0.07 ± 0.005 N·m)
6
3 knob (tune)
2 gear (midway)
CV101
2 gear (VC)
1 Cutting lack of a washer is united with boss and
it inserts in the direction of an arrow.
washer
2 Washer is moved in the direction of an arrow
with tweezers.
tweezers
1 Boss of a gear (VC) checks that it is in a position
as shown in a figure, and attaches to the axis
of CV101.
gear (VC)
boss
2 Gear (VC) is turned until it stops in the direction
of an arrow.
cutting
lack
boss
chassis block
chassis block
axis