Sony SRF-18 Service Manual page 3

Note: Follow the disassembly procedure in the numerical order given.
1-2. FRONT CABINET BLOCK
JIG
When disassembling the unit,
use the following jig.
Part No. Description
9-913-402-33 Tool for Disassembly
3 Insert the jig in the space between
the cabinet front assy and the cabinet
rear assy and remove.
ire ettin
speaker (3.6 cm)
red
+
-
blue
– Front top view –
4 three claws
6 adhesive sheet
7 Lift up the cabinet front assy
in the direction of an arrow.
6 two adhesive
sheets
2 three screws
(1.7)
4 claw
8 Remove
two solders.
5 Remove all claws while
rounding in outer.
8 Remove
two solders.
SRF-18
1 Open the battery case lid.
– Rear bottom view –
4 three claws
4 three claws
– Front top view –
9 front cabinet block
ire ettin
speaker (3.6 cm)
brown
-
+
orange
3