Manual Override - VANLEIGH PINECREST Owner's Manual

Manual Override

Top of Jack Motor Override:
3/8
Tools needed:
" drive ratchet and extension (no socket)
1. Find the port on the top of the jack motor (Fig. 12A).
2.
Remove the rubber plug (Fig. 13A).
3/8
3.
Insert the " drive ratchet into the port (Fig. 14).
4.
Turn the override until the jack extends or retracts to desired position.
Bottom of Jack Motor Override:
3/8
Tools needed:
" drive ratchet and extension,
1. Find the port on the bottom of the jack motor (Fig. 12B).
2.
Remove the rubber plug (Fig. 15A).
5/16
3.
Insert the " socket into the port (Fig. 16).
4.
Turn the override until the jack extends or retracts to desired position.
Fig. 12
A
B
7 4
Rev: 06.28.18
5/16
" socket
Fig. 13
A
Fig. 15
A
Page 16
Fig. 14
Fig. 16
CCD-0001519
Z
T