VANLEIGH PINECREST Owner's Manual page 111

degrade the signal, affecting picture quality.
• Television stations transmit their broadcast signal "over the air" to surrounding areas.
• TV antennas are designed to receive the broadcast signals.
• Picture quality depends on the antenna type and your distance from the transmitter.
• The further you are from the transmitter, the weaker the signal becomes, affecting picture quality.
T V S I G N A L B O O S T E R
• The TV Signal Booster must be turned ON for improved antenna reception.
• The TV Signal Booster sends 12-volt DC power to the TV roof antenna. This voltage energizes the transistors in the
antenna head amplifier.
• Turn OFF the TV Signal Booster to view cable/satellite TV, or to use a DVD/Blu-ray player or Game System.
C A B L E / S AT E L L I T E O U T L E T
Both Cable and Satellite connection outlets are found in the outside utility center.
• The Cable input connects to an RG6 cable run through in-line splitters to provide service at multiple locations.
• The Satellite inputs connect to RG6 cables run directly to specific locations (no splitters). This allows for clean trans-
fer of HD signals from the satellite dish.
Please refer to the (customer supplied) satellite manufacturer manual for setup, care and maintenance instructions.
T V R O O F A N T E N N A
To watch local TV stations, turn ON power to both the TV and the TV Roof Antenna. For the best TV reception, your
antenna must point toward the nearest signal transmitter. You can find the exact locations of transmitting towers
at www.fcc.gov.
To Aim the Antenna
1. Turn ON the TV signal booster switch, then turn ON the power to your TV. On the TV menu, set the input of the TV to
"ANTENNA," "BROADCAST" or "OFF AIR."
NOTE: Steps 2–6 rotate the antenna to locate the best possible signal. Keep track of the knob position where you re-
ceive the highest number of channels.
2. Press the button and rotate the antenna all of the way in one direction until it hits the stop.
3. Scan for channels on the TV or TV converter box per the manufacturer's instructions. Note how many channels
are received.
E L E C T R O N I C S
1 1 1