Exemption Of Liability; Emergency Stop Buttons To Be Connected - Leuze electronic MSI-S/R Original Instructions Manual

The operator of the machine is responsible for:
• instructing the operating personnel
• maintaining the safe operation of the machine
2.4

Exemption of liability

Leuze electronic GmbH + Co. KG is not liable in the
following cases:
• Safety Interface Device is not used as intended
• safety notices are not adhered to
• reasonably foreseeable misuse is not taken into ac-
count
2.5

Emergency STOP buttons to be connected

• It must be secured that the EMERGENCY STOP function
is always and immediate effective. In Chapter 5, Connec-
tion examples, there is a particular example illustrating
the connection of an EMERGENCY STOP button.
• When a two-channel Section Emergency Stop button is
connected, MSI is able to realize a Section Emergency
• adhering to all regulations and directives for occupatio-
nal safety and safety at work
• regular testing
chapter 2.2 and 2)
• mounting and electrical connection are not properly
performed
• proper function is not tested
• changes (e.g., constructional) are made to the Safety
Interface Device
Stop function. Section Emergency Stop buttons con-
nected to the MSI only affect the safety ciruit that is
assigned to the AOPD. For this reason, it is referred to
as an Section Emergency Stop. The limited area of
effect of the button must be identified for the operating
staff in a manner that is cleary visible.
MSI-s
by competent personnel (see
11