Barkan ND400 Assembly Instructions Manual page 4

4 4 4 4 Place part A on the wall, use a stud finder to make sure the 4 holes
are not on studs. Level part A on the wall using the finger-saving tool.
Mark the 4 holes in part A on the wall with a pencil.
5 5 5 5
Place the arrow anchors Z7 in the finger-
saving tool.Hammer the anchor into the wall.
Please note that the longer tab of the anchor
is facing up.
Assemble the wall plate to the wall with
the screw and washer.
Z Z Z Z 7 7 7 7
Z Z Z Z 7 7 7 7
A A A A
Z Z Z Z 8 8 8 8
Z Z Z Z 4 4 4 4
Page 4 of 7
Z Z Z Z 9 9 9 9