Console Assembly - True SHOWRUNNER Owner's Manual

CHAPTER 4: SHOWRUNNER CONSOLE

CONSOLE ASSEMBLY:

Console Wire Connections:
Connect the Auxillary Power Supply (A), Coaxial Cable (B), USB Data Cable (C), Ground Wire Ring Terminal (D), and
CSAFE Cable (E) as shown below. Tuck the Ethernet Communication Cable, Console Fan Cable, and any excess cord
length inside the pedestal.
Note: Ensure the rubber boot is positioned over the coaxial cable connection point after making the connection (B).
Note: Refer to the respective unit manual included with your unit for console mast and rear console cover assembly.
Note: Before connecting the power source and mounting the console to the unit, connect the USB data cable. When
removing the console from the base unit, power down the console and remove from the console mast before disconnecting
the USB data cable.
D
B
C
A
E
Truefitness.com / 800.426.6570 / 636.272.7100
31 of 33