Advertisement
Table of Contents
- 1 Tools Required for Assembly
- 2 Step 1: Measure the Height of Your CPU
- 3 Step 2: Raise the Workstation to Its Highest Level
- 4 Step 3: Insert Socket Screws
- 5 Step 4: Slide the Weld Nut into the Groove
- 6 Step 5: Place Your CPU Onto CPU Holder Assembly B
- 7 Step 6: Repeat Steps 3 and 4 with CPU Holder Assembly a
- 8 Note: to Mount the CPU Holder on the Right Leg Assembly
- Download this manual
K&A Manufacturing
6703 Zinser Street
Schofield, WI 54476
Phone: 800.298.4351
Fax: 866.882.9475
www.raproducts.com
Version Dated: 4/15/16
310CPU Holder
Read all the instructions before beginning.
Instruction # 52611
Hardware Pack # 51907
Page1 OF 3
Advertisement
Table of Contents
Related Manuals for RightAngle 310CPU
Summary of Contents for RightAngle 310CPU
- Page 1 K&A Manufacturing 6703 Zinser Street Schofield, WI 54476 Phone: 800.298.4351 Fax: 866.882.9475 www.raproducts.com Version Dated: 4/15/16 310CPU Holder Read all the instructions before beginning. Instruction # 52611 Hardware Pack # 51907 Page1 OF 3...
- Page 2 Hardware Pack # 51907 Drawn Actual Size ITEM # PART # DESCRIPTION QTY. 800166 310CPU Holder Assembly B 800224 310CPU Holder Support Bracket 800165 310CPU Holder Assembly A 52963 5/16-18 Weld Nut 4" CL'S 53638 5/16-18 x 3/8 Button Head Socket Screw 4...
- Page 3 Step 5: Place your CPU onto CPU holder Assembly B 1 and slide the support bracket 2 tightly against the side of your K&A Manufacturing CPU. 6703 Zinser Street Schofield, WI 54476 Phone: 800.298.4351 Fax: 866.882.9475 www.raproducts.com Step 6: Repeat Steps 3 and 4 with CPU Holder Assembly A 3 .
Need help?
Do you have a question about the 310CPU and is the answer not in the manual?
Questions and answers