Qu-Bit Electronix Bloom Manual page 18

T o move forward a page, press reset.
T o loop the page that is being edited press channel.
It is also possible to edit the length of the gate for each step both while running and while
in T une Mode.
For each step, the gate length can be adjusted by pressing the encoder and rotating it.
There are 8 gate lengths from 6ms triggers, to tied.
The gate lengths other than trigger and tied notes, are based on a percentage of the length
of the note from 10% to 90%.
While looping a page within T une Modes the Channel LED will pulse between the channels'
color and white.
T o exit the Per-Step note editor, hold shift, and click the Notes encoder.
11. Out 1
1V/Oct output for channel 1.
0-5V output.
12. Out 2
1V/Oct output for channel 2.
0-5V output.
13. Gate 1
Gate output for channel 1.
6ms 5V pulses.
14. Gate 2
Gate output for channel 2.
6ms 5V pulses.
18