IMPORTANT SAFETY PRECAUTIONS ATTENTION INSTALLER: This guide contains important information about the installation, operation and safe use of this product. This information should be given to the owner and/or operator of this equipment after installation or left on or near the filter. ATTENTION USER: This manual contains important information that will help you in operating and maintaining this filter.
WARNING : To reduce the risk of injury, do not permit children to use this product unless they are closely supervised at all times. CAUTION : This filter is for use with permanently installed pools and may be used with hot tubs and spas if so marked.
Install the pressure gauge (supplied with the filter) into the marked hole in the lid, using Teflon tape on the gauge thread. If the filter is installed below water level, isolation valves must be installed on the inlet & outlet to enable the filter to be dismantled for cleaning without the loss of water from the pool or spa.
STARTING INSTRUCTIONS WARNING: THIS FILTER OPERATES UNDER HIGH PRESSURE. When any part of the circulating system, (filter, pump, valves, clamp etc) are serviced, air can enter the system and become pressurized. Pressurized air can cause the lid to be blown off, which can result in severe injury, death, or property damage. To avoid this potential hazard, please follow these instructions.
Page 6
MAINTENANCEOF YOUR FILTER Maintenance Schedule: Your new product incorporates moving parts and withstands high velocity water with chemicals in it. Some of these parts will wear in the normal course of use and require regular checks and maintenance. Performing these checks and maintenance will identify parts that have worn and require repair/replacement before further serious damage is sustained.
Page 7
INST 371 VIRON QL Cartridge Filter V08-20...
Page 8
Fluidra Group Australia Pty Ltd 219 Woodpark Road, Smithfield, N.S.W. 2164 ABN 087 002 641 965 INST 371 VIRON QL Cartridge Filter V08-20...