Table of Contents
Advertisement
6.11 Calibrat
6.11
6.11
6.11
Calibrat
Calibrat
Calibration
ion
ion
ion of the speed sensor
1/ 1/ 1/ 1/
Mark out
Mark out
Mark out 100 m
Mark out
100 meters
100 m
100 m
eters
eters ( ( ( (tank half full
eters
2 2 2 2 / / / /
Display
Display
Display
Display the settings page
the settings page 1. Cli
the settings page
the settings page
3/ 3/ 3/ 3/
Bring the tractor to the starting point.
Bring the tractor to the starting point.
Bring the tractor to the starting point.
Bring the tractor to the starting point.
4/ 4/ 4/ 4/ Press on the key
Press on the key
Press on the key
Press on the key
5/ 5/ 5/ 5/
Cover the
Cover the distan
distance
ce and stop at the
and stop at the 100 m
Cover the
Cover the
distan
distan
ce ce
and stop at the
and stop at the
6/ Return to the settings page
6/ Ret
urn to the settings page 1 1 1 1
6/ Ret
6/ Ret
urn to the settings page
urn to the settings page
6.11.1
6.11.1
Direct input of number
Direct input of number of of of of pulses.
6.11.1
6.11.1
Direct input of number
Direct input of number
Go to settings page
Go to settings page 1. 1. 1. 1.
Go to settings page
Go to settings page
Select the wheel
Select the wheel
Select the wheel
Select the wheel
Position
Position the rectangle on the number of
Position
Position
the rectangle on the number of
the rectangle on the number of
the rectangle on the number of pulses.
Click on the thumb wheel and input the desired value
Click on the thumb wheel and input the desired value. . . .
Click on the thumb wheel and input the desired value
Click on the thumb wheel and input the desired value
Return to the work page
Ret
Ret
Ret
urn to the work page
urn to the work page
urn to the work page
NOVATEC ISOBUS AND NOVATOP
of the speed sensor
of the speed sensor
of the speed sensor
tank half full), ), ), ),
tank half full
tank half full
1. Click on
1. Cli
1. Cli
ck on
ck on
ck on
100 meters mark
eters mark
100 m
100 m
eters mark
eters mark
Click on Ok
Click on
Click on
Click on
Click on ESC
Click on
Click on
Click on
Number of
Number of pulses p
Number of
Number of
then to the work page
then to the work page
then to the work page
then to the work page
pulses.
pulses.
pulses.
. . . .
Tecnoma technologie – 54, rue Marcel Paul – BP 195 – 51206 Epernay
e – mail
SAS with a capital of 1 174 400 € – RCS Epernay B 350 484 309 – APE 293D
INSTRUCTIONS FOR USE
OF REGULATIONS
to display the calibration page
to display the calibration page
to display the calibration page
to display the calibration page
Ok
Ok to validate the value
Ok
to validate the value
to validate the value
to validate the value
ESC
ESC in case of error and restart
ESC
in case of error and restart
in case of error and restart
in case of error and restart
pulses per er er er 100 m
100 m
pulses p
pulses p
100 m
100 m
pulses.
pulses.
pulses.
Tel +33(0)3 26 51 99 99 – Fax +33(0)3 26 51 83 51
tecnoma@tecnoma.com
-
www.tecnoma.com
Page
23/31
990025
Mars 2012
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Novatec Isobus and is the answer not in the manual?