Use Of The Box; Opening/Closing Of The Boom (Work Screen 1); Sequential Mode - Tecnoma Novatec Isobus Operating Handbook

6 6 6 6 USE OF THE USE OF THE

USE OF THE BOX

USE OF THE
Work screen 1 1 1 1 Work screen
Work screen Work screen
Box power up screen.
Opening/closing the boom in

sequential mode

6.1 O O O O pening 6.1 6.1 6.1 pening pening pening/ / / / closing of the boom closing of the boom closing of the boom ( ( ( (Work screen closing of the boom
6.1.1 6.1.1 Sequential mode Sequential mode
6.1.1 6.1.1 Sequential mode Sequential mode
On power- - - - up, the controls screen of the boom appears allowing the opening of the boom in seq On power On power On power up, the controls screen of the boom appears allowing the opening of the boom in seq up, the controls screen of the boom appears allowing the opening of the boom in sequential mode. up, the controls screen of the boom appears allowing the opening of the boom in seq
The opening is done by applying the following sequences The opening is done by applying the following sequences
The opening is done by applying the following sequences The opening is done by applying the following sequences
Passing at jauge intervals to the right Pass ing at jauge intervals to the right
Pass Pass ing at jauge intervals to the right ing at jauge intervals to the right
NOVATEC ISOBUS AND NOVATOP
BOX BOX. . . . BOX
Work screen Work screen 2 2 2 2
Work screen Work screen
Work screen display by Work screen display by Work screen display by Work screen display by
pressing on pressing on
pressing on pressing on
Work screen 1) 1) 1) 1) Work screen Work screen
Folding Action Folding Action
Folding Action Folding Action
Power up screen Power up screen Power up screen Power up screen
Tecnoma technologie – 54, rue Marcel Paul – BP 195 – 51206 Epernay
Tel +33(0)3 26 51 99 99 – Fax +33(0)3 26 51 83 51
e – mail
SAS with a capital of 1 174 400 € – RCS Epernay B 350 484 309 – APE 293D
INSTRUCTIONS FOR USE
OF REGULATIONS
Unfolding Action Unfolding Action
Unfolding Action Unfolding Action
Passing at intervals from right to left Pass
Pass Pass
Go to spraying page Go to spraying page
Go to spraying page Go to spraying page
tecnoma@tecnoma.com - www.tecnoma.com
Work screen 3 3 3 3 Work screen
Work screen Work screen
Work screen display by Work screen display by
Work screen display by Work screen display by
pressing on pressing on
pressing on pressing on
uential mode. uential mode. uential mode.
ing at intervals from right to left
ing at intervals from right to left ing at intervals from right to left
990025
Mars 2012
Page
13/31