Fans; Removing And Replacing A Fan - IBM IC922 Servicing

2. Hold the drive by the top and bottom edges as you position the drive, and insert it into the drive slot.
Important: Ensure that the drive is fully seated and is all the way into the system.
3. Lock the drive bay handle (A) by pushing in the handle release as shown in the following figure.
Figure 8. Replacing a drive
4. Load or restore data from your backup media.
Removing and replacing fans in the 9183-22X system
Find information about removing and replacing fans in the IBM Power System IC922 (9183-22X) server.
Removing and replacing a fan in the 9183-22X system
To remove and replace a fan in the system, complete the steps in this procedure.
Before you begin
Attention: When the system is powered on, a fan can be unplugged for only 20 seconds before the
system shuts down. Once you unplug a fan, you have 20 seconds to replace the fan.
(L005)
12 Power Systems: Servicing the IBM Power System IC922 (9183-22X)