Figure 6: Securing the Battery
7 Reassemble the back housing by screwing in the three screws.
WARNING: Safety Critical
Use a T8 tamper proof torx screwdriver with 3.8 +/-0.1 lbf-in torque to ensure that the
screws are tightened.
Figure 7: Reassembling the Back Housing
WARNING: Safety Critical
•
Do not power up the RSM and/or connect the audio jack immediately after replacing
the battery.
•
To ensure that there are no loose elements left, shake the device gently.
•
If you hear any internal rattling or any abnormal sound, disassemble the RSM to
inspect for any abnormalities, for example, loose components.
MN006126A01-AA
Chapter 6: Maintenance
19