Mounting And Demounting; Fig. 21 Mounting - Beckhoff CU2508 Documentation

Mounting and wiring
3.2

Mounting and demounting

The CU2xx switches are mounted on the mounting surface with the aid of a 35 mm DIN rail (mounting rail
according to EN 60715).
Mounting
• Fit the mounting rail to the planned assembly location.
• Suspend the switch on the mounting rail with the spring on the lower side of its latching flange.
• Press the switch upwards (1).
• Press the upper side of the switch (2) against the assembly surface until it latches in the mounting rail.
• Attach the cable.
Fig. 21: Mounting
Removal
• Remove all the cables.
• Press the switch upwards (3).
• Pull the other side of the switch (4) away from the assembly surface.
24 Version: 2.6 Real-time Ethernet port multiplier