Download Print this page

MD SPORTS BBG019 067M Assembly Instructions Manual page 17

Advertisement

English
ELECTRONIC SCORER OPERATION:
1. Install Batteries:
Battery Box: Unscrew the bolt using a screwdriver
and open the battery box. Insert 3 "AAA" batteries
( not included) in the order of polarity as shown
on the inside cover. Then close the cover using a
screwdriver.
Turn the power ON using the ON/OFF switch.
2. Reminding:
a. Batteries must be installed according to the
correct polarization (+ and -) required.
b. Please clean the battery contacts and also
those of the device prior to battery installation.
c. If the game will not be used for a long period of
time, we recommend that the batteries should
be removed.
WARNING:
!
1) Require 3 pcs "AAA" Batteries (Not included).
2) Do not mix old and new batteries.
3) Do not mix alkaline, standard (carbon zinc), or
rechargeable (nickel - cadmium) batteries.
BBG019_067M
OPERACIÓN DEL MARCADOR
ELECTRÓNICO:
1. Instalación de las baterías:
Caja de baterías: Desatornille el perno con un
destornillador y abra la caja de baterías. Inserte
3 baterías "AAA" (no incluidas) en el orden de
polaridad que se muestra en el interior de la tapa.
Luego cierre la tapa con un destornillador.
Encienda la alimentación utilizando el interruptor
ON/OFF.
2. Recordar:
a. Las baterías se deben instalar de acuerdo a la
polarización correcta (+ y -) requerida.
b. Limpiar los contactos de las baterías y también
de los dispositivos antes de instalar la baterías.
c. Se recomienda extraer las baterías si el juego
no se va a utilizar durante un largo periodo
de tiempo.
ADVERTENCIA:
!
1) Requiere 3 piezas de Baterias "AAA" (No incluido).
2) No mezcles baterias viejas y nuevas.
3) No mezcles baterias alkalina, estándar (carbón
zinc), o recargable (níquel-cadmio).
Timer OR Game
Mode Display
Marcador
Score
Player 1
del
Joueur 1
Score
jugador 1
Botón
Marche
ON/OFF
ON/OFF/
/Arrêt
Start
START
Démarrer
Español
P3
Visualización del
Minuteur OU
modo de juego o
Affichage Mode
del temporizador
Jeu
Player 2
Score
Select Sound
On/Off
16
FONCTIONNEMENT DU MARQUEUR
ELECTRONIQUE:
1. Installation des piles
Compartiment des piles : Dévissez la vis avec un
tournevis pour ouvrir le compartiment des piles.
Insérez 3 "AAA" piles (non inclues) en vérifiant la
polarité marquée sur le couvercle. Refermez le
couvercle avec un tournevis puis allumez
l'appareil avec la touche ON/OFF.
2. Attention:
a. Placer les piles en respectant la polarité (+ et -).
b. Veuillez nettoyer les contacts des piles et ceux
du compartiment avant de mettre les piles
en place.
c. Si ce jeu n'est pas utilisé pendant une longue
période, nous vous recommandons de retirer
les piles.
AVERTISSEMENT:
!
1) 3 Piles "AAA" requises (Non incluses).
2) Ne pas mélanger nouvelles et vieilles piles.
3) Ne pas mélanger des piles alcalines, standard
(carbone, zinc), ou rechargeables (nickel - cadmium).
Marcador
Score
del
Joueur 2
jugador 2
Botón
Choisir
SELECT/SOU
Volume
ND ON OFF
Marche/Arrêt
Français
www.themdsports.com

Advertisement

loading