Husqvarna PG680 Programming page 14

Opening the Parameter file
Go to File
The first time you run NCDrive you may need to manually select the file path for
the NCDrive program as to where you have the parameters files saved, after
this it should remember the path for any future installations.
Select the parameter file (.par) you wish to install and click "Open".
Unlike in NCLoad where we use the same system software for both frequency
converters, in NCDrive, we have separate parameter files for each frequency
converter. In this example we will use the following files:
- 1kW-820 & 680 - 400V STANDARD APP when connecting to the larger
frequency converter.
- 3kW-820 & 680 - 400V STANDARD APP for the smaller frequency converter
When selected, the file will open with full parameter listings appearing on the
screen.
Select "Download" tab (the correct terminology should really be upload) to
install parameters from computer to frequency inverter.