Interfaces; System Design - Sierra Wireless AirPrime SL808 Series Product Technical Specification & Customer Design Manuallines

4: Interfaces

Rev 1 Dec.10 Proprietary and Confidential - Specifications subject to change

4.1 System design

This chapter describes the AirPrime SL808X Embedded Module's
LGA pad configuration (see
supported interfaces (Table
Table 4-1: Available interfaces and signals
Name
General purpose input/output
on page 41
Main serial link (UART1)
on page 42
SIM interface
on page 44
USB 2.0 interface
on page 47
RF interface
on page 52
Analog audio interface
Digital audio interface (PCM)
on page 64
JTAG interface
The SL808X has two main interface areas—the host I/O perimeter
I/O ports (pins) and the RF ports.
SL808X Embedded Module's system block with these interface areas
identified.
Pin configuration on page 33) and
4-1).
Driven by AT
commands
on page 40
on page 62
Figure 4-1 portrays the AirPrime
4





31