Environmental Specifications - ABB Symphony Harmony Series Instruction

Specifications
Table 1-6. SIM-100 Block Specifications
Property
Isolation
Insulation resistance
(100 VDC)
Dielectric test VAC
(45-65 Hz) or VDC
Overvoltage category
Fusing
Dimensions
NOTE:
1. All specification values are maximums unless stated otherwise.
2. Supports one Simulation LAN connection. The RJ-45 port and AUI port are mutually exclusive. An RJ-45 port connection can-
not be made if there is already an AUI port connection and vice versa. The SIM-100 module will automatically switch the internal
Ethernet circuitry to the AUI port or RJ-45 port depending one where it senses activity.
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
Table 1-7. Environmental Specifications
Environment
Air quality Noncorrosive
Altitude Sea level to 3,048 m (10,000 ft)
Relative humidity 20% to 95% up to 55°C (131°F)
(noncondensing)
20% to 45% at 55° to 70°C (131° to
158°F)
Temperature 0° to 70°C (32° to 158°F)
(internal enclosure)
Vibration 10 to 60 Hz, 1.37 mm (0.054 in.) pp
60 to 150 Hz, 1.0 G sine
Shock —
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
1 - 14
(continued)
Characteristic/Value
1.2 MΩ
0.5 kV /1 min
RMS
I
1.6 A, 250 V, 5 x 20 mm, fast-acting, low break capacity (IEC 127-2/II)
Type
mm
Module 266
Base 267
NOTE: Refer to Appendix A for hardware drawings.
Operating
1
Height Width
in. mm in.
10.5 76 3.0
10.5 138 5.4
Storage and Transportation
Noncorrosive
Sea level to 12,000 m (40,000 ft)
20% to 95% up to 55°C (131°F)
20% to 45% at 55° to 70°C (131° to
158°F)
-40° to +85°C (-40° to 185°F)
0.74 G longitudinal
RMS
0.20 G transverse
RMS
1.04 G vertical
RMS
10 to 500 Hz random
15 G, 11 msec
Depth
mm in.
162 6.4
169 6.7
WBPEEUI210507A0