Fire Detector Fo 1362 - D+H LSC-M Series Instructions For Use Manual

X.x 6.6

Fire detector FO 1362

If this LED lightens, release has been taken place
through this
Release will be reset via "Closed-Reset"-button in
a SHEV-button.
Technical Data
Operating voltage
Rest current
Alarm current
Alarm display
Storing temperature
Working temperature : -20 to +72 °C
Protective system
Housing
Technical design
VdS approval
44/48
LSC 44-M4
automatic detector.
: 8 V - 28 VDC
: <55μA
: 9.2mA ±1 mA
: LED rot
: -25 to +75 °C
: IP40
(with PG-basel IP42)
: ABS synthetic, white
: EN 54, part 7
: G29226 (O-1362)
Ø 90
Ø 84
Ø 42
The detector consists of the base with the
connections and the detector upper part with
evaluation unit. Detector base and upper part are
connected via a bajonet catch (a quarter turning).
The smoke detector must be horizontally placed at
the highest point underneath the ceiling in proximity
of the landing entrance on the first main evacuation
level.
See also instruction for use of FO 1362
Mounting
- Fasten detector with 2 screws
- Close cable bushings, which are not used
- A protective cap is available for avoiding dirt
accumulation during construction (see figure)