Air Filter Lf-Ad - D+H LSC-M Series Instructions For Use Manual

X.x 4.7

Air Filter LF-AD

Exchange of Air Filters
1. Unscrew the 4 screws on housing cover
2. Remove housing cover
3. Remove filter elements
4. Clean carefully housing inside from dust deposits
5. Put in new filter elements in correct order
6. Place housing cover upon housing and screw down again
suction tube
flowing-through
direction
(see indicating label on housing bottom)
preliminary filter
coarse particle filter
Mounting
1. Unscrew swivel nut of PG29-screw fittings
2. Stick suction tubes into both sides
3. Screw down again swivel nuts
4. Screw filter housing directly on wall with
housing lower part
Observe flowing-through direction
of the filter with mounting!
(label on housing outside)
90
fine particle filter
PG 29-
screw fitting
suction tube
swivel nut
LSC 44-M4
21/48