Working Techniques; General Working Instructions - Husqvarna BA101 Operator's Manual

General working instructions

For assembling accessories on basic machine, refer to
manual for basic machine.
In order to prevent damage due to falling of the product,
assembly and dismantling should be conducted close to
the ground surface.
IMPORTANT! This section considers basic safety rules
when working with blowers. If you encounter a situation
where you are uncertain how to proceed you should ask
an expert. Contact your dealer or your service
workshop. Avoid all usage which you consider to be
beyond your capability.
Show consideration to persons in your surroundings by
avoiding using the machine at unsuitable times, such as
late in the evening or early in the morning. To reduce
sound levels, limit the number of pieces of equipment
used at any one time. Read through and follow the simple
directions so that you disturb your surroundings as little as
possible.
• Use the blower with the lowest possible throttle. It is
seldom necessary to use full throttle, and many work
procedures can be done at half throttle. A lower
throttle means less noise and less dust, and it is also
easier to keep control over the rubbish collected
together/moved.
• Use a rake or a brush to release rubbish stuck to the
ground.
• Hold the opening of the blower as close to the ground
as possible. Utilise the entire length of the blow pipe
to keep the air current close to the ground.
• Clean corners by starting in corners and moving
outward. This will help prevent an accumulation of
debris which could fly into your face.
• Clean up afterwards. Make sure that you have not
blown rubbish into someone's garden. Dispose of
debris in trash receptacles.
• Operate power equipment only at reasonable hours,
not early in the morning or late at night when people
might be disturbed. Comply with times listed in local
ordinances.
WARNING! Be aware of your
!
surroundings. If anyone approaches your
work area, set the throttle control to the
lowest throttle until the person is at a
safe distance. Direct the blower away
from people, animals, play areas, open
windows and cars etc. The force of air
can cause rocks, dirt or sticks to be
thrown or to ricochet which can hurt
people or animals, break glass or cause
other damage.
• Never put hands or other objects into blower housing
to avoid serious injury from the rotating impeller.

WORKING TECHNIQUES

• Keep outside surface free from oil and fuel.
• Never use for spreading chemicals, fertilizer or other
substances which may contain toxic materials.
• To avoid spreading fire, do not use near leaf or brush
fire, fireplaces, barbecue pits, ashtrays, etc.
• Never douse or squirt the attachment with water or
any other liquid.
Basic safety rules
• No unauthorised persons or animals may be present
in the working area, which is 15 metres.
• Always use both hands to hold the machine. Hold the
machine at the side of your body.
• Allow the engine to cool before refueling.
• Keep all parts of your body away from hot surfaces.
• The powerful currents of air can move objects at such
a speed that they can bounce back and cause serious
eye injuries.
• Do not direct the air jet towards people or animals.
• Stop the engine before assembling or dismantling
accessories or other parts.
• Do not use the machine in bad weather, such as
dense fog, heavy rain, strong wind, intense cold, etc.
Working in bad weather is tiring and can lead to
dangerous conditions, e.g. slippery surfaces.
• Minimise the blowing time by lightly wetting dusty
areas or using spray equipment.
• Conserve water by using power blowers instead of
hoses for many lawn and garden applications,
including areas such as gutters, screens, patios, grills,
porches and gardens.
• Make sure you can move and stand safely. Check the
area around you for possible obstacles (roots, rocks,
branches, ditches, etc.) in case you have to move
–
English 225