Key To Symbols; Symbols - Husqvarna BA101 Operator's Manual

Symbols

WARNING! The machine can be a
dangerous tool if used incorrectly or
carelessly, which can cause serious or
fatal injury to the operator or others.
Please read the operator's manual
carefully and make sure you
understand the instructions before
using the machine.
Always wear:
• Hearing protection
• Approved eye protection
A breathing mask should be used
when there is a risk of dust.
Gloves should be worn when
necessary.
This product is in accordance with
applicable EC directives.
The blower can forcibly throw
objects that can bounce back.
This can result in serious eye
injuries if the recommended
safety equipment is not used.
The blower operator
must ensure that no
people or animals come
closer than 15 metres.
When several operators
are working at the same site a safety distance of at least
15 metres must be in effect.
Noise emission to the environment
according to the European
Community's Directive. The
machine's emission is specified in
the Technical data chapter and on
the label.
Severing of fingers or hand by fan
blade. Do not open or remove the
safety guards or nets while engine i
running.
2 – English

KEY TO SYMBOLS

Other symbols/decals on the machine refer to special
certification requirements for certain markets.
Switch off the engine by moving the
stop switch to the STOP position
before carrying out any checks or
maintenance.
Always wear protective gloves.
Regular cleaning is required.
Visual check.
Protective goggles or a visor must be
worn.