Download Print this page

Williams Sound SoundPlus Basic Courtroom System WIR SYS 1 Specification Sheet page 6

Basic courtroom system
Hide thumbs Also See for SoundPlus Basic Courtroom System WIR SYS 1:

Advertisement

SoundPlus
®
Basic Courtroom System •
D
D
Multiple Emitters Installed to Maximize Coverage
Fig. 8a: Overlapping Illumination Patterns to Cover Larger Listening Areas
Fig. 8a above is a typical example of how multiple emitters are used to cover larger listening areas.
Generally it is desirable for the illumination patterns to overlap. Note: The coverage area will vary depend-
ing on the infrared receiver being used; refer to Figures 4 and 7 to determine how many emitters are
required to achieve full coverage of a listening area.
Fig. 8b: Overlapping Illumination Patterns to Cover Larger Listening Areas
TX9
TX9
When two emitters are used at the same emission point in single channel mode, the overall coverage area incre-
ses 50%. When using an RX22-4 receiver, as a result, the coverage area will increase to an estimated 42,000 ft
(3,902 m
2
); the RX14-2 will increase to 5,250 ft
NOTE: SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE!
©2006, Williams Sound Corp. MCAT 027D
TX9
TX9
2
(488 m
Model WIR SYS 1
TX9
TX9
2
); the RX16 will increase to 4,590 ft
6
Coverage Area
with Single Emitter
Coverage Area
with Second Emitter
Added to Same
Emission Point
(50% increase)
2
2
(426 m
2
).

Advertisement

loading
Need help?

Need help?

Do you have a question about the SoundPlus Basic Courtroom System WIR SYS 1 and is the answer not in the manual?