Williams Sound SoundPlus Basic Courtroom System WIR SYS 1 Specification Sheet page 3

SoundPlus ® Basic Courtroom System •
D
D
Fig. 3: WIR TX9 Rear Panel
Fig. 4: Receiver Coverage Area with TX9 Emitter in Single Channel Mode
Feet 90
80
70
60
50
40
30
20
10
0
-10
-20
-30
-40
-50
-60
-70
-80
-90
Feet 0
10 20 30
The coverage area for the TX9 will vary depending on the receiver being used. The diagram above
demonstrates the receiver coverage when operating a single TX9 emitter in single channel mode.
Patterns are direct radiation patterns.
Note: Reflections of the infrared light from walls, ceilings and floors may change these patterns.
NOTE: SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE!
©2006, Williams Sound Corp. MCAT 027D
Multi-Channel Infrared Transmitter
RoHS
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Class 1
WARNING: TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK DO NOT EXPOSE THIS
LED Product
EQUIPMENT TO RAIN OR MOISTURE.
Mounting
Note: It is normal for this unit to feel warm while it is in operation.
Bracket
Power Supply Wiring:
Use NEC, Class 2 Wiring, 18 ga. minimum,
200 ft. (70m) maximum length (18 ga.)
Baseband Signal Wiring:
Use RG58 Coax,1000 ft. (350m) max. length
Williams Sound Corp., Minneapolis, Minnesota, USA
Made in U.S.A.
Patent Pending
NC 24 VAC
Power In:
~
24VAC
Plug
50-60Hz
35VA
Power On
RX16 RX14-2
40 50 60 70 80 90 100 110 120 130 140 150 160
Model WIR SYS 1
w w w . w i l l i a m s s o u n d . c o m
Baseband Signal Wiring:
Use 50 Ohm Coaxial Cable (RG58)
Baseband
(Modulation)
Out Out In
50 Ohms
Baseband On
Receiver Coverage Area with TX9
Transmitter in Single Channel Mode
RX22-4
3
RX22-4 Receiver
RX14-2 Receiver
RX16 Receiver