Williams Sound Receiver WIR RX14-2 Instructions For Use And Care

WIR RX14-2 Receiver: 2.3 MHz or 2.8 MHz
Instructions For Use & Care
S I B S
AFETY NFORMATION ATTERY
Hearing Safety:
CAUTION!
Do not attempt to recharge dispos-
able batteries, which may explode,
This product is designed to amplify
release dangerous chemicals, cause
sounds to a high volume level which
burns, or other serious harm to the
could potentially cause hearing dam-
user or product.
age if used improperly. To protect your
hearing and the hearing of others:
P
ACEMAKER
1. Make sure the volume is turned
down before putting on the ear-
phone or headphone before adjust-
ing the volume to a comfortable
1. Before using this product with a pace-
level.
maker or other medical device, con-
sult your physician or the manufactur-
2. Set the volume level at the mini-
er of your pacemaker or other medical
mum setting that you need to hear.
device.
3. Do not allow children or other
unauthorized persons to have access
2. If you have a pacemaker or other med-
to this product.
ical device, make sure that you are using
this product in accordance with safety
guidelines established by your physician
or the pacemaker manufacturer.
FRM 451G ©2007 Williams Sound Corp
R I
ECYCLING
& D
AFETY ISPOSAL
CAUTION!
Help Williams Sound protect the environment! Please take the time to dispose of
your equipment properly.
Product Recycling:
Please do NOT dispose of your Williams Sound equipment in the household trash.
Please take the equipment to a electronics recycling center; OR, return the product
to the factory for proper disposal.
S
AFETY
Battery Recycling:
CAUTION!
Please do NOT dispose of used batteries in the household trash. Please take the
batteries to a retail or community collection point for recycling.
5/10/06
A
PPROVALS
This product meets approval standards established for:
RoHS WEEE
2
NSTRUCTIONS
O I
PERATING NSTRUCTIONS
RX14-2 Headset Receiver
FRONT VIEW
1. Turn the receiver's Power Switch to ON.
2. Place the headset on your head and adjust the headband size by pulling or pushing
on each earpiece.
3. Locate and adjust the individual volume controls for a comfortable listening level.
4. Choose between 2.3 MHz or 2.8 MHz operation by pressing the frequency selector
button on the left earphone. NOTE: Be sure the infrared transmitter being used is
transmitting on 2.3 MHz or 2.8 MHz!
I
MPORTANT
The infrared receiver "eye" is located directly above the battery compartment (see
illustration). Do not cover it up or you will lose reception.
Note: To maximize battery life, turn the receiver OFF when it's not in use.
3