3onedata IPMC101 Series Quick Installation Manual

IPMC101 Series
Industrial Media Converter
Quick Installation Guide
3onedata Co., Ltd.
Address: 3/B, Zone 1, Baiwangxin High Technology
Industrial Park, Xili,
Shenzhen
Website: www.3onedata.com
Tel: +86 0755-26702688
Fax: +86 0755-26703485
【Package Checklist】
Please check whether the package and accessories are intact
while using the media converter for the first time.
1. Media Converter (equipped
with terminal blocks)
3. Quick installation guide
5. DIN-Rail mounting attachment
If any of these items are damaged or lost, please contact our
company or dealers, we will solve it ASAP.
【Product Overview】
The product is industrial media converter. Its models are as
follows:
Model I IPMC101-F-POE (1 100M PoE copper port + 1 100M
fiber port)
Model II IPMC101-1S-POE (1 100M PoE copper port + 1
100M SFP fiber port)
【Panel Design】

Rear view, bottom view and top view

Front view
Nanshan District,
2. Certification
4. Warranty card
1.
2.
3.
4.
5.
6.
7.
Model I Model II
DIN-Rail mounting kit
Grounding screw
Power supply input
DIP switch
Alarm indicator
PoE port power supply status indicator
Running status indicator
8. Power supply indicator
9. 100M PoE copper port
10. Copper port connection status indicator
11. Fiber port connection status indicator
12. 100Base-FX fiber port
13. 100Base-FX SFP fiber port
【Mounting Dimension】
Unit: mm
Note before mounting:
 Don't place or install the device in area near water or
moist, keep the relative humidity of the device
surrounding between 5%~95% without condensation.
Before power on, first confirm the supported power

supply specification to avoid over-voltage damaging the
device.
 The device surface temperature is high after running;
please don't directly contact to avoid scalding.
【DIN-Rail Mounting】
For convenient usage in industrial environments, the product
adopts 35mm DIN-Rail mounting, mounting steps as below: