Installing The Add-On Card Aoc-Atg-I2T (With 1U Bracket) - Supermicro AOC-ATG-i2T User Manual

3-3 Installing the Add-on Card AOC-ATG-i2T (with 1U
bracket)
Follow the steps below to install an add-on card into your system. (If the system
is fixed onto a rack, the removal of server top cover is not required. If the system
is not anchored to a fixed structure, it is recommended to remove the system top
cover for ease of installation.)
A. Uninstalling an AIOM module
1. Slide the black latch to the left to "unlock" position, then disengage the AIOM
module from the chassis strcture by pushing the blue latch once to extend it outward.
The latch to engage/
disengage the AIOM
module
Remove the AIOM
card from this slot
The AIOM card with
the bracket installed
3-3
Chapter 3: Installation