BlueBox Datatech Installation, Use And Maintenance Manual page 4

4.8.1 Switching the unit on/off
4.8.2 Change of set points
4.9 Wiring diagram
5 Installation
5.1 Dimensions and weight
5.2 Place of installation
5.3 Installation
5.3.1 Positioning the units
5.3.2 The base frame (Versions UNDER)
5.3.3 Separate fan section
5.3.4 Positioning the air condenser
5.3.5 Minimum distances
5.4 Hydraulic connections
5.4.1 Connections to the plate condenser
5.4.2 Connections to the water chiller coils
5.4.3 Connection to the condensate drain
5.4.4 Connection to the hot water coil
5.4.5 Connection to the humidifier
5.5 Electrical connections
5.6 Refrigeration connections
5.6.1 Piping implementation
5.6.2 Changes in temperature and speed in the cooling lines
5.6.3 Change in performance
5.7 Vacuum and refrigerant charge
6 Commissioning
6.1 Preliminary operations
6.2 First starting
6.3 Calibration of safety components
6.4 Checks during operation
6.5 Alarms and malfunctions
6.6 Temporary stop
6.7 Stop for long periods of time
7 Maintenance
7.1 Adjustments
7.2 External cleaning
7.3 Internal cleaning
7.3.1 Cleaning the unit
7.4 Periodic checks
7.5 Unscheduled maintenance
7.5.1 Special work
4
Translation from original instructions We reserve the right to make changes without any prior notice.
23
23
24
25
25
25
26
26
27
27
27
28
29
29
30
30
31
31
32
33
33
38
40
41
42
42
43
44
45
46
47
47
48
48
49
49
49
50
51
51