Sync Menu - ABB DY365 Series User Manual

SYNC MENU

SYNC menu allows you to enable or disable the presence of the additional DY GPS or DY DCF77 modules.
DY GPS allows you to capture the information of date, time and location from satellites and then to transfer them
to DY365. DY DCF77 allows you to capture the informations of date and time. Both DY GPS and DY DCF77 are available as accessories.
Synchronization occurs every 30 minutes. In this way the time of DY365 is always synchronized and are canceled the drifts due to the
tolerance of the oscillator which marks the time base.
To enable the presence of DY GPS / DY DCF77:
set
SyNC ON
It's also possible to display the status of the connection to DY GPS / DY DCF77 (ok, waiting, error).
From the status page, while by pressing the key
DY365 (the display shows
To disable the presence of DY GPS / DY DCF77:
set
SyNC OFF
If DY GPS or DY DCF77 modules are not connected, it's advisable to set
on the start page of DY365 (see page 8).
SyNC ERR
Note: the internal oscillator which marks the time base allows DY365 to maintain the updated time even without the presence
of DY GPS / DY DCF77. In this case clock accuracy is ± 0.5 seconds per day.
for at least 3 seconds it's possible to force data sending from DY GPS / DY DCF77 to
).
SyNC OFF
- 62 -
User manual DY365
to avoid displaying unnecessary information message