Bus Menu - ABB DY365 Series User Manual

BUS ABB MENU

BUS MENU

DY365 enables you to control 8 independent channels but It has
two relays (for channels 1 and 2). With additional DY365 4CE or
DY365 2CE modules it's possible to add some relays and associate
these relays to the channels of DY365.
The remote actuators and DY365 all together are named
"network".
"Bus" menu allows you to configure or to test the connection
between DY365 and the actuators
several DY365 connected to the network
configure the outputs, to associate the channels of DY365
to the channels (relays) of the remote actuators
to test the connection, to verify the correct association among
the channels of DY365 and the channels (relays) of the
actuators
to send programs to the other DY365 connected to the network
to receive the programs from another DY365 connected to the
network
or share programs among
.
- 56 -
User manual DY365
Note: during the configuration or channels test and during the
reception of programs on the bus the switchings of all
channels are disabled.