Graco GrindLazer 270 Operation page 7

Starting the Engine
3. Engage Rear Wheel Brake (G) to prevent Grin-
dLazer from moving.
4. 480/630 Models Only: Attach LineDriver to
GrindLazer.
5. Push down on handle bars until drum is locked into
UP position.
6. 480/630 Models Only: Make sure Engine Stop
Switch (C) is in UP position.
3A0101F
ti14754a
ti15089a
ti14758a
ti15088a
7. Start Engine:
a. Move fuel valve to open.
ti5248a
270/390 Models
b. Move choke to closed.
ti5249a
270/390 Models
c. Set Engine Power Switch (B) to ON.
270 & 390 Models
d. Pull starter cord.
ti5263a
e. After engine starts, move choke to open.
270/390 Models
f. Set throttle to desired setting.
Operation
480 Models
630 Models
480 Models
ti14872a
ti3315a
480/630 Models
480 Models 630 Models
ti6483a
ti15091a
7