Energy profile with three empty units, height: 491 mm energy profile with lighting element and three empty units, height: 769 mm energy profile with six empty units, height: 769 mm (8 pages)
Page 1
Mounting Instructions Call push button 1-gang for indoor station 1283 00 Call push button 3-gang for indoor station 1285 00...
Page 3
Device description The call push buttons 1 and 3-gang are part of the Gira door communication sys- tem and are used to expand the indoor stations. The basic structure is presented in the example of the call push button 3-gang:...
Page 4
Mounting Attention Installation and mounting of electrical devices may only be carried out by a qualified electrician. The call push buttons for indoor stations are operated together with a indoor sta- tion: 1. Insert the audio connection cable into a system connector of the bus coupler or speech insert of the indoor station.
Page 5
2. Remove the call push button cover(s). 3. Change the label plate. 4. Clip the call push button cover(s) back Suitable label plates can be obtained with the optional Gira labelling software and the appropriate Gira labelling sheets.
Page 6
Please submit or send faulty devices post- age paid together with an error descrip- tion to your responsible salesperson (specialist trade/installation company/ electrical specialist trade). They will forward the devices to the Gira Service Center.