Advertisement
Connecting accessories
Hose
1
To connect the hose to the appliance, push it into the appliance and turn it clockwise (fig. 1).
2
To disconnect the hose from the appliance, turn it anticlockwise and pull it out of the
appliance.
Tube
Conical coupling (specific types only)
1
To connect the tubes to the handgrip, insert the narrow section into the wider section while
turning it clockwise (fig. 2).
Use the same method to connect the accessories to the tube.
2
To disconnect, turn the tube or the accessories anticlockwise and pull.
Button coupling (specific types only)
1
Connect the tube to the handgrip ("click") (fig. 3).
Use the same method to connect the accessories to the tube.
2
To disconnect the tube from the handgrip, push the lock button and pull the tube out of the
handgrip (fig. 4).
The accessories are disconnected in the same way.
Telescopic tube (specific types only)
1
Connect the tube to the handgrip.
2
Adjust the tube to the length you find most comfortable during vacuum cleaning. (fig. 5)
Nozzle
Convertible nozzle (specific types only)
The convertible nozzle can be used on either carpets or hard floors.
1
Connect the convertible nozzle to the tube.
2
Push the rocker switch on top of the convertible nozzle with your foot to make the brush
strip for cleaning hard floors come out of the nozzle housing(fig. 6).
3
Push the rocker switch again to make the brush strip disappear into the convertible nozzle
housing (fig. 7).
Reach & Clean nozzle (specific types only)
The Reach & Clean nozzle can be used on either carpets or hard floors.The nozzle can be
turned 360 degrees to 4 different positions, allowing you to also vacuum clean hard-to-reach
places in an easy way.When the nozzle is positioned lengthwise, the suction power is
concentrated at the front side of the nozzle (fig. 8).
To adjust the nozzle to the type of floor and the area to be cleaned, put your foot on the
indicated spot and then turn the tube until the nozzle is in the required position (fig. 9).
1
With the nozzle positioned breadthwise and the brush strip folded out, you can clean large
hard floor areas.Turn the tube until the brush strip pops out of the nozzle housing and the
nozzle is positioned breadthwise (fig. 10).
ENGLISH
7
Advertisement
