Program Moonlight Color Spectrum; Customized On-Demand Color Spectrums; On-Demand Dynamic Modes - Current Satellite LED Plus Pro Instructions Manual

Programming Instructions cont'd

Program moonlight color spectrum

1. Press Moonlight
2. Press any of the pre-programmed color spectrums
using the adjustment buttons
Please see page 6 for moonlight color spectrum specifications and recommendations.
3. When the desired moonlight color spectrum and intensity is reached, press Moonlight
and hold for 5 seconds. Light will blink, indicating the moonlight color spectrum is now stored
in memory. Press the RESUME

Customized on-demand color spectrums

1. Press M1 or M2 (memory locations)
2. Press any of the pre-programmed color spectrums
until your desired color spectrum is acheived. Press M1
blink, indicating color is stored in memory.
3. Press M1 or M2
M1
exit the custom color and put the light back in timer mode, press Resume
On-demand dy namic modes
1. Press any of the dynamic modes on-demand
2. To exist the dynamic mode and put the light back in timer mode, press Resume
Please note: these modes are recommended as on-demand only and cannot be incorporated into a
programmed lighting schedule.
Controller Tips
The controller features an integrated IR (infrared) sensor which recieves signals via the IR wireless
remote. The remote will work up to 30 ft. away from the controller, however it is best to ensure there
is a clear "line of sight" between the remote and controller when programming or using dynamic lighting
modes.
Many other home electronics use IR technology for control (such as your television TV). If you notice
your light changing colors or time schedule changing, ensure your other electronics are not interfering
with it (i.e. place the controller in a different location around the aquarium or under the stand).
Note: The RESUME
Please ensure to press RESUME whenever you want the light to go back into the normal timing mode.
www.current-usa.com
Moon
Light
key for light to go back into normal programming mode.
RESUME
M1
M2
at any time to view your aquarium under your custom color spectrum. To
key can be used as a toggle between timing mode and color/dynamic modes.
RESUME
until your desired color spectrum is acheived.
M2
or M2
M1
and customize the color and intensity
and adjustment keys
for 3 seconds. The light will
M2
RESUME
RESUME
Moon
Light
PAGE 5 of 6