(Note: This stand has a maximum weight load of 350 lbs.) This stand is designed only for use on level surfaces only. Failure to place your stand on a level surface could cause the aquarium to leak, crack or even tip or fall). WWW.CURRENT-USA.COM...
hardware identification For easier assembly, it is best to separate all of the hardware components into packs as shown below. Please note that a Phillips head screwdriver will be required for assembly (not included). Hardware Pack 1 Wood Screw (Long) "...
Page 5
Pre-Assembly: We highly recommend assembling this stand on a flat, soft surface such as a thin carpet floor or towel. Assembly on a soft surface will help prevent scratching of any of the wood components. Using Hardware Pack 1, assemble the drawer as show below. Note that this section requires the use of a Phillips head screwdriver. WWW.CURRENT-USA.COM...
Page 6
Step : top panel and left side panel assembly Using Hardware Pack 2, assemble the top panel and left side panel as shown below. WWW.CURRENT-USA.COM...
Page 7
Step : back panel assembly Using Hardware Pack 3, assemble the back panel as shown below. WWW.CURRENT-USA.COM...
Page 8
Step 4 : right side panel assembly Using remaining components of Hardware Pack 3, assemble the right side panel as shown below. WWW.CURRENT-USA.COM...
Step 5 : bottom panel assembly Using Hardware Pack 4, assemble the bottom panel as shown below. WWW.CURRENT-USA.COM...
Page 10
Step 6 : door assembly and installation of drawer stops Using Hardware Pack 5, assemble the bottom panel as shown below. Please note that a Phillips head screwdriver will be required for assembly (not included). WWW.CURRENT-USA.COM...
Page 11
Step : attaching back panels & shelf installation Using Hardware Pack 6, assemble the bottom panel as shown below. Please note that a Phillips head screwdriver will be required for assembly (not included). WWW.CURRENT-USA.COM...
Page 12
Clean cabinet with a soft cotton cloth moistened with water. Do not use abrasives or cleaners. Most cleaners are toxic to aquatic organisms. Do not leave water on any of the stand's surfaces. Always wipe spilled water from the stand. Water, for prolonged periods, could damage the stand's surfaces. WWW.CURRENT-USA.COM...
If you discover a defect, please see your retail store or point of purchase. Current USA, Inc. will, at it's option, repair or replace the product at no charge to you, provided you return it during the warranty period. It is required that you present this warranty card and a copy of the bill of sale as proof of original purchase date, in the event the product needs repairs, within the warranty period.