L) Mounting/Setup Of The Temperature Controller - Renkforce 1391580 Operating Instructions Manual

l) Mounting/setup of the temperature controller

The temperature controller can be attached to the wall using an opening in
the rear and, e.g., a hook, nail or screw.
Alternatively, you can unfold the setup base at the reverse and put the tem-
perature controller on a level, stable surface. Protect valuable furniture sur-
faces from scratches with suitable pads.
Select a location as operating site that is not in the sun or next to a
radiator. This leads to a wrong temperature or humidity display, as
well as wrong control of the heating or cooling unit connected to the
receiver.
46