Tone Specifications; Audible Signals - STARPLUS STSe Key System Installation Manual

2-6
Chapter 2 - System Specifications

Tone Specifications

Audible Signals

The Terminals provide ringing and confidence signals to the user and to calling parties
according to
Feature (Indication)
Incoming CO Line
Intercom Tone Ringing
Intercom Call Announce (H & P)
Transferred CO Line
Line Recall
Message Waiting Call Back
Queued CO Line Call Back
Camp On
Alarm Tone - Repeated
- Single (continuous)
* Only one tone can be selected by a station at a time. This tone will be used for all signaling that
uses the "User Selectable Tone".
STARPLUS STSe - Installation Manual
Table 2-5 and Table 2-6.
Table 2-5: Signals To Called Station (Digital Station)
Sound In Hz
(*User Selectable)
(*User Selectable)
(*User Selectable)
(*User Selectable)
(*User Selectable)
(*User Selectable)
701/857
701/857
Occurrence (Cadence)
.8 sec on/2.4 sec off repeated
.4 sec on/.4 sec off/
.4 sec on/2 sec off repeated
935 .2 sec on/.2 sec off; 2 bursts
.8 sec on/2.4 sec off repeated
.2 sec on/.6 sec off repeated
.4 sec on/.4 sec off/
.4 sec on/2 sec off repeated
.2 sec on/.6 sec off repeated
935 .2 sec burst
.25 sec on/.25 sec off; repeated
1.0 sec on; once (every 30-60
secs until alarm is reset.
Configuration Tables
August 2005