Table of Contents
Advertisement
3. Log into your BodyZone Connect™ app
account.
4. The 'Controller List' will display on the
screen once logged in. To add a controller
to the list, touch the
top right-hand corner of the screen. Select
'Via Wi-Fi'.
5. 'Add Controller' will appear on the screen
and will display the name of the connected
home Wi-Fi network.
NOTE
The device does not support 5GHz Wi-Fi.
Please ensure to connect to a 2.4GHz Wi-Fi
connection.
16
LZB518_LZB538_LZB558_IB_Generic_C19_FA.indd 16
symbol found in the
6. Press and hold the
button on the physical
ENTER
controller for 8 seconds or until the Wi-Fi
symbol flashes on the screen.
7. In the app, enter the password of the home
Wi-Fi network that the mobile phone is
connected to.
8. Select
on the screen and the app will
FINISH
begin to add the controller. This process may
take up to 20 seconds. A prompt will appear
to show the controller has been added
successfully. The saved controller will appear
in the 'Controller List' under the default
name as 'My Controller'.
NOTE
The physical controller is connected when the
Wi-Fi symbol displays on the screen. If there
is an exclamation mark (!) next to the Wi-Fi
symbol and an error prompt displays on the
app, then the connection with the home Wi-Fi
network has failed. Make sure your Wi-Fi is
enabled and within range before trying again.
13/11/19 8:26 am
Advertisement
Table of Contents
