Functions; Before First Use; Securing Your Fitted Heated Blanket - Breville BodyZone Instruction Book

Functions

BEFORE FIRST USE

Remove any promotional material and
packaging from the heated blanket.
SECURING YOUR FITTED HEATED
BLANKET
Unfold the heated blanket and lay it flat on
the mattress, ensuring that the skirt is aligned
with the corresponding edges. Ensure that the
controller socket(s) is facing up and positioned
at the top end of the mattress.
Ensure that the heating wire section on the
blankets is clear of the pillow and does not
hang over the sides of the mattress.
Pull the elastic inside the fitted skirt over the
ends of the mattress. Ensure to pull the middle
of the blanket so that it is evenly stretched and
distributed over the entire mattress, ensuring
there are no creases or rucking.
10
LZB518_LZB538_LZB558_IB_Generic_C19_FA.indd 10
NOTE
The heated blanket must not be wider than
the mattress with which it is to be used. It is
normal for a small section of the fitted skirt to
be showing on top of a larger sized mattress.
No heating wire must be trapped or tucked
into any part of the bed. The heating wire
should not hang over the sides of the mattress.
Ensure the elastic of the blanket skirt is
completely under the entire mattress and
secure.
When fitted to the mattress correctly, the
controller socket(s) should be positioned at
the top end of the mattress, near occupant's
shoulder area.
NOTE
Ensure that the blanket is stretched completely
flat when placed on the mattress and creases or
rucking is not evident.
CAUTION
No heating wire must be trapped or tucked
into any part of the bed.
Ensure that when the blanket is fitted onto the
mattress, the controller(s) and flexible power
supply cord are outside of the bed coverings
and located in a position that will prevent
accidental damage to the housing and cords.
Use this blanket as an under blanket and do
not use above the occupant of the bed.
13/11/19 8:26 am