Using The Auto Setting; When Not In Use - Breville BodyZone Instruction Book

USING THE AUTO SETTING

The AUTO setting on the BodyZone™ heated
blanket acts as a memory or favourites function.
To program the auto setting, slide the control
switch up from 'OFF' to 'AUTO', then follow the
previous instructions for using the controller on
the 'MANUAL' setting. The heated blanket can
then be switched off at the controller.
When next used, slide the control switch up from
'OFF' to 'AUTO'. The LCD screen will illuminate
and display the last manually programmed heat
and auto-off settings.
Safety off after 9 hours.
NOTE
It is not recommended that you sleep with the
heated blanket switched on. Should you choose
to leave your blanket on all night, however, the
lowest heat setting (1,1) should be used.
NOTE
When lying on a heated blanket, your body
forms part of an electromagnetic field created
by the blanket. Some people may feel a tingling
sensation or subtle vibration as a result of
this, or when touching someone else lying on
the heated blanket. This is common to most
heated blanket brands and only some people
experience this effect. There is no cause for
concern and the sensation is not an electric
shock. All Breville heated blankets are quality
tested in our Australian laboratories for
safety, durability and performance and feature
overheat protection as an additional safety
feature.

WHEN NOT IN USE

When the blanket is not in use, slide the control
switch to 'OFF' and unplug the power supply
cord from the power outlet.
14
LZB518_LZB538_LZB558_IB_Generic_C19_FA.indd 14 13/11/19 8:26 am