Advertisement
OPERATING INSTRUCTIONS
FAN-ONLY MODE
1.
Plug in the unit, press the reset button on the GFCI,
and select a fan speed on the control panel. The fan
will start running as soon as you select a fan speed.
2.
To start/stop fan oscillation, push down/pull up the
clutch knob (G).
3.
To adjust the airflow upward or downward, simply tilt
the fan head by hand and move to the desired angle.
4.
The height of the fan can be adjusted by loosening the
height adjustment knob (O) and carefully raising or
lowering the fan and retightening the knob
MISTING MODE
1.
Connect a standard ¾" garden hose to the misting hose valve (S).
Water pressure should not exceed 550 kPa (5.6 kfg/cm2). Only use
a hose in good condition.
2.
With the garden hose turned on at the spigot, turn the lever on the
misting hose valve to the right to turn on water to the fan.
3.
Turn the lever back (to the left) to temporarily disable the misting
feature. To disable the misting feature for a longer period of time,
close the water valve lever and turn the spigot off as well.
9
.
3
2
1
t
0
Hide quick links:
Advertisement
